Carpentier offers thermo pine cladding with knots (pine) and without knots (clear pine). You can find the profiles we offer in thermo pine with knots here. Make sure to read about the specific advantages as well as the various finishing options that we can supply.
Thermo pine is a great sustainable alternative for tropical hardwoods and an excellent option for outdoor cladding. Carpentier offers a wide variety of ready-to-use profiles, including three standard profiles in a black finish. We can also create custom cladding profiles in HOTwood pine as required.
We can also apply a fire-retardant treatment to our HOTwood pine outdoor cladding in compliance with B-s2,d0 norms and/or apply a finish to meet your specific requirements, including charring, brushing and oiling. Black and transparent finishes are particularly popular for use with exterior cladding in thermo pine. Besides these, a single-layer treatment with pale grey oil is often used to create a pre-weathered look without the wait. After this treatment, thermo pine weathers naturally with even more beautiful results. Please let us know if you would like more information about options for your project.
|
|
For ease of use and rapid results when installing HOTwood pine cladding, we recommend QuickClip® profiles.
These ready-to-use profiles in wood feature the unique, invisible Grad® installation system, which reduces installation time by 50%. Moreover, since they guarantee that boards are perfectly aligned, you can count on a seamless result every time.
Our QuickClip® profiles in thermo pine are 100% reusable. If desired, you can fully dismantle cladding and reassemble it with no risk of damage. This makes our thermo pine cladding an outstanding choice for circular construction.
Thermo pine QuickClip® cladding can be dismantled using a set of Grad® dismantling keys. This makes it easy to access electrical wiring behind the cladding, for example, or to replace a thermo pine board.
Make sure you never use glue, so as to ensure the circular nature of our QuickClip® products. The clip grip is a handy tool that protects circularity.
Woodworking professionals can reduce installation time by up to 50% by using our QuickClip® products instead of traditional installation methods.
Carpentier works closely with architects and dealers who create remarkable projects using our thermo clear pine, such as a dental clinic in Oostrozebeke and an apartment building in Koksijde.
READY FOR MORE INSPIRING IDEAS?
Besides the profiles with knots shown below, we also have a lovely range of flaw-free profiles without knots for cladding in HOTwood pine. Have a look at our thermo clear pine cladding.
CBQC
Profile: 42 x 42 x 2700mm or more
Interval of 18mm or 38mm
Including the QuickClip® system, consisting of aluminium joists* (12 x 55mm)
with pre-mounted clips for placement at 60cm intervals
Also available without the installation system
Our most popular finishes: brushed and black
*Under some conditions, the black coating on the rails may fade over time. For this reason, we advise customers to have aluminium rails anodised when using profiles with gaps of more than 10mm.
DSB1
Profile: 26 x 140 (coverage width 132) x 2700mm or more
Fitted with tongue & groove
Closed profile
Meets D-s2,d0 reaction to fire standards
Our most popular finishes: brushed and black
Please note: allow for at least 2mm expansion at the tongue and groove joint, since HOTwood may expand slightly in humid conditions.
SV3QC
Profile: 20 x 40 x 2700mm or more
Square edged
Interval of 5mm
Including the QuickClip® system, consisting of aluminium joists (12 x 55mm)
with pre-mounted clips for placement at 60cm intervals
Meets B-s2,d0 (horizontal) / C-s1-d,0 (vertical) reaction to fire standards, after a fire-retardant treatment
Also available without the installation system
Our most popular finishes: brushed and black
Also available in HOTwood ash, HOTwood clear pine, Accoya and aluminium
PLAN
Profile: 20 x 140 (coverage width 132) x 2700mm or more
Fitted with tongue and groove
Extremely durable
The charred look is a perfect imitation of the characteristic dragon-scale pattern of charred wood: deep black, embossed and brushed
Easy maintenance: apply a fresh coat of water-based black paint every five to seven years
Good to know: the charred finish will retain its beauty forever
Meets D-s2,d0 reaction to fire standards
An economical alternative for charred wood
For interior and exterior use
Please note: allow for at least 2mm expansion at the tongue and groove joint, since HOTwood may expand slightly in humid conditions.
SV4
Combination of four profiles: 20 x 90 (coverage width 71) | 26 x 68 (coverage width 49) | 20 x 115 (coverage width 96) | 20 x 68 (coverage width 49) | 26 x 68 (coverage width 49) x 3000mm or more
Fitted with tongue and groove
Varying widths and thicknesses give a dynamic play of lines
Brushed black finish (standard 7-year finish warranty) - Sand finish also available
Perfect for blind nailing
Meets D-s2,d0 reaction to fire standards
Please note: allow for at least 2mm expansion at the tongue and groove joint, since HOTwood may expand slightly in humid conditions.
PIL
Profile: 40 x 140 x 1500mm or more (finger-jointed from 3000mm)
Fixed louvers to be installed at regular intervals
Lamellated and solid
4 smooth sides square edged
Other dimensions available upon request
Also available in HOTwood ash
Looking for something a little more rugged? Have a look at our ould oak beams and old oak wall panelling. These are also ideal for use as a Pillar line profile.
SV+QC
Profile: 26 x 40|65|90|140 x 2700mm or more
Fixed widths in variable pattern
Square edges
Interval of 4mm
Including the QuickClip® system, consisting of aluminium joists (12 x 55mm)
with pre-mounted clips for placement at 60cm intervals
Also available without the installation system
Our most popular finishes: brushed and black
RB2
Profile: 12/26 x 140 (coverage width 125) x 2700mm or more
Upon request, also available with black finish and/or wider coverage widths (minimum order of 3,000 m)
Please note: allow for spacing of at least 2mm, since HOTwood may expand slightly in humid conditions.
RELQC
Profile: 20 x 40|65|90|140 x 2700mm or more
Fitted with groove on underside
Including the QuickClip® system, consisting of aluminium joists
with pre-mounted clips for placement at 60cm intervals
Meets D-s2,d0 reaction to fire standards
N1
Profile: 20 x 140 (coverage width 132) x 2700mm or more
Fitted with tongue & groove
Meets D-s2,d0 reaction to fire standards
Our most popular finishes: brushed and black
Please note: allow for at least 2mm expansion at the tongue and groove joint, since HOTwood may expand slightly in humid conditions.